| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Gecko Drives Discuss all Gecko drives here and get direct support! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
03-22-2010, 08:46 PM
| |||
| |||
I am running the G540 on the Dyna DM3000 with a 48vdc @ 4.5A PS. It was recommended that I run the Escap P852 half coil. I did that and I could never get it to go continuously in 1 direction. I thought it was noise or a bad connection. I checked all of those and then at the suggestion of another Dyna owner was to wire it in bipolar series. I did that and reset the current set pot to 2.5v instead of the 3.5v and it works great. I also dont notice a speed change better or worse but now I will be able to set accel and velocity more accurately. Does it make sense why this would help the directional issue?   |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Univelop 4/5 axis direction issues - Solved | yngndrw | Stepper Motors and Drives | 0 | 12-16-2009 02:46 PM |
| I'm having wiring issues | Antonyong | Stepper Motors and Drives | 2 | 06-11-2009 02:45 AM |
| Reverse Stepper Direction, Wiring Questions... | Patrick_M | Hobbycnc (Products) | 0 | 10-02-2008 01:36 PM |
| Wiring a dual-coil toroidal transformer... | mzungu | General Electronics Discussion | 2 | 01-24-2008 07:23 AM |
| Half-winding bipolar wiring diagram needed | braidmeister | Stepper Motors and Drives | 10 | 05-21-2006 09:10 PM |
| | |
Linear Mode
