- Need Help!- Different Voltages for G540 Inputs
-
Registered
Different Voltages for G540 Inputs
Hi,
My homing/limit switches are connected to the G540 via my motor power supply, which is 48VDC.
I've wired my switches per the sample wiring diagram in the G540 manual. i.e From the -VDC outlet of the motor power supply, through the switch and connected to the input terminals on the G540 terminal block.
I’ve just purchased this wireless tool height sensor that requires 5VDC - 24VDC; Wireless tool length sensor - CNCdrive - webshop
Can anyone offer any guidance on how I can connect the tool height sensor.
Any assistance you can provide would be greatly appreciated.
PS: I have a separate 12VDC power supply
Similar Threads:
-
-
-
Registered
Re: Different Voltages for G540 Inputs
Thanks John
- Need Help!- Different Voltages for G540 Inputs
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules