G320X Tuning..


Results 1 to 2 of 2

Thread: G320X Tuning..

  1. #1
    Member lancut's Avatar
    Join Date
    Nov 2008
    Location
    USA
    Posts
    412
    Downloads
    0
    Uploads
    0

    Default G320X Tuning..

    I need to tune the G320X drive with the oscilloscope. The instruction manual says to use those TINY pads for this.. How in the hell you supposed to connect the probes to it? At his point I'm thinkig to solder small pins buit I'm concerned it will void the warranty and because this is a friend of mine machine I don't want to take the chance.. I'm beginning to regret very much my suggestion to go with G320X drives.. In other post Marcus Freimanis promissed short video how to do this, if such a thing exists somewhere it would be much appreciated if someone point me to it. As of now, any closeup picture would help. Thanks.

    Similar Threads:
    My 2¢


  2. #2
    Member
    Join Date
    Nov 2016
    Location
    United States
    Posts
    31
    Downloads
    0
    Uploads
    0

    Default Re: G320X Tuning..

    Gecko has a pdf on how to tune the G320X without an oscilloscope.

    Sent from my SM-G900V using Tapatalk



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

G320X Tuning..

G320X Tuning..