Newbie- Need G code Help ASAP

[AAI]

hello people

I am neew to both this site and the CNC world but I have a 1991trumpf 2503 laser cat and I am having issues with the programing.

1. dose any one know what G801[ ] is used for I know its some kind of table ref. but not sure what or how to use it.

I have progamed a pice that has a bunch of holes and some radis rectangles and the program in erroring out in the same spot on the rectangles. but if i take out the 814(laser on) and 816(laser off) command it makes the movements just fine?????

any hints or help would be great.

Thanks
AAI

[BobWarfield]

Google is your friend. Googling "g-code reference G801" gives this as the first hit:

http://pdf.directindustry.com/pdf/de...33189-_75.html

Cheers,

BW

[AAI]

Thank you for the insite. I did look at that site and it seems that the trumpograph has its G801 as a Tech table refrance. but i do thank you for the help.

Thanks agian
AAI