Need Help!- Tapping Program after Point Pattern on Canned Cycle Heidenhain TNC 355

[parametric.ms]

Anyone can help me to give a sample to program with canned cycle on heidenhain TNC355

example : 3 row x 5 column, cycle process : After make a 30 mm depth drill than continue to tapping cycle.

[Jukka Honkanen]

There are lots of ways to do that.
Here´s one.

0 BEGIN PGM 1 MM
1 BLK FORM 0.1 Z X+0 Y+0 Z-35
2 BLK FORM 0.2 X+100 Y+100 Z+0
3 TOOL CALL 24 Z S800
4 CYCL DEF 1.0 PORAUS
5 CYCL DEF 1.1 ETAIS2
6 CYCL DEF 1.2 SYVYYS-30
7 CYCL DEF 1.3 ASETUS10
8 CYCL DEF 1.4 O.AIKA0.2
9 CYCL DEF 1.5 F150
10 LBL 2
11 L X+10 Y+10 R0 F9999 M3
12 CYCL CALL
13 LBL 1
14 L IX+15 R0 M99
15 CALL LBL 1 REP3
16 CYCL DEF 7.0 NOLLAPISTE
17 CYCL DEF 7.1 IY+15
18 CALL LBL 2 REP2
19 LBL 0
20 CYCL DEF 7.0 NOLLAPISTE
21 CYCL DEF 7.1 Y+0
22 TOOL CALL 32 Z S200
23 CYCL DEF 2.0 KIERTEITYS
24 CYCL DEF 2.1 ETAIS2
25 CYCL DEF 2.2 SYVYYS-25
26 CYCL DEF 2.3 O.AIKA0
27 CYCL DEF 2.4 F200
28 CALL LBL 2
29 END PGM 1 MM

Jukka