| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| G-Code Programing Discuss G-code programing and problems here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
11-10-2009, 06:09 AM
| ||||
| ||||
I have an old program that was given to me and I need to convert it back to cad so I can 3d model it. I've tried to just type in the points but I am not familiar with this output... Normally when I do this I have in my G02/G03 lines an I and a J, this particular program just has an R. Any Ideas?  |
|
#2
11-10-2009, 08:07 AM
| ||||
| ||||
| R is the radius of the arc.
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
#4
11-12-2009, 10:30 AM
| ||||
| ||||
| Draw an arc from the previous point to the specified XY coordinate with the radius R.
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Newbie- think back to V18 | MailleMas | BobCad-Cam | 0 | 12-16-2008 11:21 PM |
| TL-1 (program from front or back) | WEDDLETON | Haas Lathes | 1 | 02-23-2008 09:27 PM |
| Anyone got any basic examples of a program using a subroutine/program? | Darc | CamSoft Products | 11 | 10-08-2005 11:45 PM |
| Lie Back And Think Of Oz | WallCrawler | CNCzone Club House | 4 | 05-11-2004 10:30 PM |
| | |
Linear Mode
