syntax error

[pyroracing85]

I have a syntax error on my program. I had several people check it and seemed to have no problems I even compared it with other peoples programs that worked. Is there any hidden errors that I could check for?

please help

[birdmun]

make sure all letters are uppercase and zeros really are zeros and not O's and ones are ones and not I's or L's

I would be happy to run it by cncsimulator on my system see what it finds ... of course I would need the .nc file

[pyroracing85]

how do I do that?

[birdmun]

just attach the file as a .txt file instead of an .nc file rename it and post it along w/ a response

[pyroracing85]

file thanks man

[birdmun]

I wish I could be of more help. You will notice in the simulation.png I modified your file somewhat. I don't know what the T202 in line N10 did or does but w/ it the output was completely useless at least as far as I could run it. I believe where the color goes from blue to pink the simulation is saying you are out of spec for the hardware(?). Let me know if any of this makes any sense to you. Maybe I can understand more. I am just now starting CNC Programming in college even though I am 33 years old. Again, please let me know if you understand any of the output.

[cogsman1]

See the changes below marked with (*****)

cogsman1
:6001
N05X2.5Z1.0T0
N10T202G96S500M3
N15G0X1.1Z0
N20G1X-.02F.002
N25G0X1.1Z.05
N30G73U.025R.025
N35G73P40Q85U.01W.005F.005
N40G0X.100(******)
N45G1G42Z0(*****)
N50G1X.25C.05
N55Z-.250
N60X.500A135
N65Z.-750
N70X.750R.100
N75Z-1.500
N80X1.0A120C.050
N84X1.05Z-1.7(******)
N85G0X1.1Z.05G40(******)
N90G70P40Q85F.002(*****)
N95G00X2.5Z1T00
N100M30
%

[birdmun]

no matter what I try I personally can't make sense of the code

[DAB_Design]

What control is this posted for? And what line do you get the error on?

[formulaz]

N05x2.5z1.0t0 ??? T0200 T0 Not Existe
N10t202g96s500m3
N15g0x1.1z0
N20g1x-.02f.002
N25g0x1.1z.05
N30g73u.025r.025
N35g73p40q85u.01w.005f.005
N40g1 G42 X.100 No Comp. G42
N45g1z0
N50g1x.25c.05
N55z-.250
N60x.500a135
N65z.-750
N70x.750r.100
N75z-1.500
N80x1.0a120c.050
N85g0x1.05z-1.7g40
N90g72p40q85f.002
N95g00x2.5z1t00 T0200
N100m30
%