| | |
Is there a way to put a "G" or "M" code in a tap file and make Mach 3 stop mid program while I do a tool change?
Dan
M6, and in the general Config in Mach3, there is an option to pause and wait for user input on an M6.
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Posting Permissions
| | |
LinkBack URL
About LinkBacks
