G65 macro B PROGRAM

[gollame]

Hi guys, isn't this just the best forum on the planet..! Ok i have a Colchester Tornado 100 with Fanuc O/T Control, half keyboard and i'm after the Macro B program as i have an 8 inch hole to drill with a 1/2 inch drill in Stainless 304L, i already no how to use the program as it works a treat but this machine doesn't have it in this workshop like the other machines, i will also need to no which parameter turns it on, any help and files will be appreciated
Many thanks
gollame

[dcoupar]

Per the owner of this site: Proprietary information, such as Fanuc OPTION parameters are NOT to be posted on this site. If you need the User Macro B option, contact your dealer.

[adamant]

Originally Posted by dcoupar Per the owner of this site: Proprietary information, such as Fanuc OPTION parameters are NOT to be posted on this site. If you need the User Macro B option, contact your dealer.

Well if you bought a used machine then there may not be any support from a dealer...............

I suppose PM's would be ok to help someone get their machine working to capability?