Need Help!- CMS machine with ECS control, G25/G26 ?

[profilemike]

1st time poster.

Regarding a CMS PK machine with the ECS control:

The ECS Programming Instructions manual describes using G25/G26 to limit the Production Field; I have followed the simple instructions but nothing seems to happen.

We have several machines, some have greater X,Y,Z travel. I am trying to limit the work area of a large machine during programming so if/when programs move to the smaller machines the setup person will not have issues with axis running against limits.

I will email this question directly to CMS but thought I would test the waters here as well.
Thanks in advance.
Mike

[beege]

CMS's website seems to have disappeared a couple of weeks ago, so have they? Good luck on support!

[profilemike]

www.cmsna.com

CMS website is working.
They have been very supportive to us the past eight years. As with any machine builder the service/tech help folks don't always know the answers to every question. The G25/G26 question seems to be one of them.