Need Help! Need help making G codes for a project - CNCzone.com-The Largest Machinist Community on the net!

2gtsvette · #1 03-22-2008, 09:28 PM

Hey guys, Am new to the whole G code scene and I need some help writing the G code for the inside lettering on a plate am making. Ive tried some g code software but it gives me a long list of coding that doesn't seem to work. If some one can help me out making the G code it will be greatly appreciated. Thanks !!!

The plunge is .050

dcoupar · #2 03-23-2008, 02:00 AM

You didn't say what machine or control it was for. These are for a Fanuc.

2gtsvette · #3 03-23-2008, 02:33 AM

Originally Posted by dcoupar

You didn't say what machine or control it was for. These are for a Fanuc.

Thanks.. sorry i forgot that key info. Its for a new Britian Machine controller sc-m4000.

Jerseycnc · #4 04-23-2011, 10:14 AM

Realize this is an old thread but didnt know where to start. Did a google seach for a New Britain Machine Controller SC-M4000 manual and not much luck. Im working for a company who has this control and need a manual. Learning off some old programs is time consuming. Can anybody assist.. Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
G68 and G69 codes	kot137	G-Code Programing	5	06-23-2010 11:51 PM
M-codes and G-codes 4 Matsuura ES-1000V	maximusek	G-Code Programing	2	11-27-2007 06:41 AM
Need help with G codes	soldier	G-Code Programing	2	11-23-2007 11:38 AM
MDI Codes Anyone know about them?	manyhobies	Coding	5	08-03-2007 03:16 PM
g-codes	pimp215	General Metalwork Discussion	11	03-07-2005 01:43 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)