needed twin pallet changer program

[stew]

i have a shoda 15m control nc163p ,with twin pallets.
but,idont have a program to do an automatic tool change,could anyone help.

[tturnbull50]

Try this, I use it on a fanuc O-M system

:5555 (LINK PROGRAM)
#531 =1 (pallet 1)
#530 =54 (G54)
P1111 M98 (Prog No for PALLET 1)
M62(change pallet)
#531 =2 (pallet2)
#530 =55(G55)
P1111 M98 (Prog No for PALLET 2)
M61
/M99
M30

Hope this helps