| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| G-Code Programing Discuss G-code programing and problems here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
11-29-2007, 08:39 AM
| |||
| |||
Hello, I have a .dfx file that I created that basically runs my cnc-router in a zig-zag motion and each time it steps over and zags back it drops the router bit another .004 inches. I'm pretty new to CNC's and G-Code and I'm useing MACH 3 to run my CNC. I've attached the .dfx file, can anyone please help me convert it to g-code? Or is there a program that will easily do that for me? I tried LazyCam but I'm not having any luck with it. Thanks! Jason  |
|
#2
11-29-2007, 09:38 AM
| |||
| |||
| % O0000 (11-16 BRIDGE SQUARE) N140 (MAX - Z.25) N150 (MIN - Z-.1202) N160 G00 G17 G90 G54 X0. Y0. S2139 M03 N170 G43 H1 Z.25 M08 N180 Z.1 N190 G94 G01 Z0. F6.42 N200 X3.2505 Z-.0002 N210 X3.251 Y.031 Z-.0042 N220 X0. Z-.004 N230 Y.063 Z-.0081 N240 X3.251 Z-.0083 N250 Y.094 Z-.0122 N260 X0. Z-.012 N270 Y.125 Z-.016 N280 X3.251 Z-.0162 N290 Y.156 Z-.0202 N300 X0. Z-.0199 N310 Y.188 Z-.024 N320 X3.251 Z-.0242 N330 Y.219 Z-.0282 N340 X0. Z-.028 N350 Y.25 Z-.0319 N360 X3.251 Z-.0322 N370 Y.281 Z-.0361 N380 X0. Z-.0359 N390 Y.313 Z-.04 N400 X3.251 Z-.0402 N410 Y.344 Z-.0442 N420 X0. Z-.044 N430 Y.375 Z-.0479 N440 X3.251 Z-.0481 N450 Y.406 Z-.0521 N460 X0. Z-.0519 N470 Y.438 Z-.056 N480 X3.251 Z-.0562 N490 Y.469 Z-.0602 N500 X0. Z-.0599 N510 Y.5 Z-.0639 N520 X3.251 Z-.0641 N530 Y.531 Z-.0681 N540 X0. Z-.0679 N550 Y.563 Z-.0719 N560 X3.251 Z-.0722 N570 Y.594 Z-.0761 N580 X0. Z-.0759 N590 Y.625 Z-.0799 N600 X3.251 Z-.0801 N610 Y.656 Z-.0841 N620 X0. Z-.0838 N630 Y.688 Z-.0879 N640 X3.251 Z-.0881 N650 Y.719 Z-.0921 N660 X0. Z-.0919 N670 Y.75 Z-.0958 N680 X3.251 Z-.0961 N690 Y.781 Z-.1 N700 X0. Z-.0998 N710 Y.813 Z-.1039 N720 X3.251 Z-.1041 N730 Y.844 Z-.1081 N740 X0. Z-.1079 N750 Y.875 Z-.1118 N760 X3.251 Z-.112 N770 Y.906 Z-.116 N780 X0. Z-.1158 N790 Y.939 Z-.12 N800 X3.251 Z-.1202 N810 G00 Z.25 |
|
#5
11-29-2007, 11:02 AM
| ||||
| ||||
| Brian, I use SheetCam to do my work and am extremely please with it. Reasonable cost and excellent support. www.sheetcam.com
__________________ Art AKA Country Bubba (Older Than Dirt) |
| Sponsored Links |
| |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| looking for g code 3d from bobcadcam or simmilar for indexer lpt v5 with g code soft | troyswood | Ability Systems - LPT Indexer and G-Code | 2 | 12-24-2006 09:21 PM |
| Can someone convert it to G-code for me ? | rceebuilder | BobCad-Cam | 6 | 11-10-2006 03:56 PM |
| How to convert 3D model to G-code? | Peten | General Metal Working Machines | 16 | 10-13-2005 03:57 PM |
| Software to convert G-code to dxf | shekargernipall | General CAM Discussion | 4 | 07-25-2005 04:31 PM |
| Convert to G-code files | quickerz | Solidworks | 4 | 05-30-2004 11:55 AM |
| | |
Help Convert .dfx to g-code please? 
Linear Mode
