g128 Macro 640MT PRO control

[nitrosnfr]

I have been trying to mill a tapered keyway on a shaft.Whe programmer writes it for us it doesn't run properly.

This is on a Integrex 400 III
When it positions to mill the key to the negative in Z it actually feeds down in X opposite of what it should be doing.

We run in EIA and the machine has only the main spindle and a tailstock.No sub spindle or lower turret.

This is how I wrote program last night when I ran it and it worked perfect.



m200
t2508.0001
g0g28u0.y0.
g28w0.
g0c0.
g97s1200m203
m250
b86.946
m251
g17
g128x.996y0.z-6.38r1s0.
g0z8.0
x-6.43
z.25
g98z0.f1.0
x0.f2.0
z.75f25.

This ran perfect and made part to the print


This is how programmer made it and it doesn't work at all X & Z moved opposite of how it is written. When it positions to mill to the -z it actually feeds down in x axis.

m200
t2508.0001
g0g28u0.
g28w0.
g0c0.
g97s1200m203
m250
g0b87.016
m251
g17
g128x0.689y0.z.05r1s0.
g0x0.y0.z0.
g98g1x1.0221f8.0
z-6.3987f2.0
x1.35f25.