Feed rates?

[Rainman229]

JUst trying to make sure i don't screw up. BUt on the F part of the g-code. lower the number slower the feedrate. Higher the faster? Just want to make sure thats right. Can't seem to find much info on feedrate for g-code. 3


thanks in advance
Claudio

[cncdigger]

On mills, Feedrate is in inch/minute or mm/minute.

On lathe, feedrate can be feed per rev (G99) or feed per minute (G98)

Alain

[ImanCarrot]

ie- yep, lower= slower

And they can't be negative

[Rainman229]

thanks guys