will this work

[swartling]

I am new to this and was wondering if anyone can see a problem with this program. I need to drill two holes in ductile iron 13.5" apart from eachother @ 180 degrees. I have fixturing and psoitioning taken care of.

%
:7080 (8 VALVE 1" DRILL)
N1 (PALLET A)
G20G40G90
(SET OFFSETS)
G10G90L1P1X0.0Y0.0Z0.0
M98P8001
M55C1 (MACRO FOR CHANGING TO PALLET A)
M1
T10M06 (1" DRILL)
M1
M00 (LUBE DRILL)
G90G54G0X0.0Y0.0S175M3
G43Z15.0H10
G98G81X6.750Y0.0Z1.750R15.5F6.6
X-6.750Y0.0
G80
G0G91G30Z0.0M15
G90M39
M1
N2 (PALLET B)
G20G40G90
(SET OFFSETS)
G10G90L1P1X0.0Y0.0Z0.0
M98P8001
M55C1 (MACRO FOR CHANGING TO PALLET A)
M1
T10M06 (1" DRILL)
M1
M00 (LUBE DRILL)
G90G54G0X0.0Y0.0S175M3
G43Z15.0H10
G98G81X6.750Y0.0Z1.750R15.5F6.6
X-6.750Y0.0
G80M39
G0G91G30Z0.0M15
G90M39
M1
M99
%

Thanks for the help!

Brian