G & M code for miyano turn mill ATS35 s

[ANKIT SISODIA]

i have bought used miyano turn mill ATS35-s but the problem is that i am not able to do crossdrill (side drill). If any one knows the G & M code then pls do let ne know. as we are using G82 but no result . Is this problem is with parameter or only codes

[dcoupar]

i have bought used miyano turn mill ATS35-s but the problem is that i am not able to do crossdrill (side drill). If any one knows the G & M code then pls do let ne know. as we are using G82 but no result . Is this problem is with parameter or only codes

You don't say what control you have, but try these:
G83 for face drilling
G84 for face tapping
G87 for cross drilling
G88 for cross tapping

[sinha_nsit]

G82 can be used on milling machines only, not on a lathe with live tool.

[parveenk78]

You don't say what control you have, but try these:
G83 for face drilling
G84 for face tapping
G87 for cross drilling
G88 for cross tapping

i have a miyano anc 45 s, i lost the parameter of 900 series of fanuc control if you can help me about this please send me the detail on my email id
kaptronindia@gmail.com

[parveenk78]

Dear sir
i have a miyano ANC-45S , but we lost the parameter of this machine due to memory card replacement , can you help me out ? we need 900 to 940 parameter of this machine of FANUC control OTT

Thanking you
Parveen kumar
my email id is : kaptronindia@gmail.com