MicroTech CNC simulator free! http://www.cncsimulator.com/download.shtml
i nowdays try to learn Gcode for milling machines but i need asimulator that help me to visualize my programs.and check for errors.
CNC, Mechatronics Integration and Custom Machine Design (Skype Avail).
ďLogic will get you from A to B. Imagination will take you everywhere.Ē
Iím new to cnc and havenít built my mill yet, but have used this to start to lean some basic gcoad. It is free but you have to go back to the web site every couple of moths to get a code to keep it working. If any body else knows a better simulator or had bad experaceis with MicroTech CncSimulator Iíd like to know.
Hope that helps jm
Iím to slow at typing !!
that looks good.
actually looking forward to work in the morning.
ahmed -- you are from Egypt - Cairo ? so ( i need asimulator that help me to visualize my programs.and check for errors ) I am
CNC Simulator works great for me except for G81 drilling.
Apparently, the interpreter needs updating, it's old.
This code will not simulate
G81 X-7.639681 Y-22.85559 Z-4
This code will simulate.
G01 X-7.639681 Y-22.85559
Found this post on the cnc simulator forum, posted by the ADMIN.
I think the CncSimulatorís interpreter needs G81 on every single block to perform a drill hole.
The CncSimulators interpreter is kind of old and basic.
I hope we can supply our users with an updated version of the interpreter soon.
You can check it out at www.ncplot.com
"Imagination and Memory are but one thing, but for divers considerations have divers names"
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Thanks for the links.
I figured out how to make CNC simulator execute the G81 drilling rountines properly. Actually it's done in Cambam.
I'm using Cambam to create my gcode. Cambam has the ability to run scripts on the gcode and filter the code as it creates it.
I run a script that takes one long g81 code line and separates it into a
G01 x10 y10
CNC simulator has several nice features above the other free simulators and so I am going to stick with it for now. The gcode from Cambam is simulating perfectly now with the script function.
Would you mind posting an example of your CamBam script that modifies the G81 lines?
here's a screen shot of a drilling routine in cambam.
The script you enter is this
there is a line feed/return character after the $Y
A small text editing window will open up so you can enter your script.
then choose CustomScript as your drilling method and cambam will apply your script to the Gcode it produces.
let me know if you have any questions
I just can't get the return character. How do you insert it? When I hit return in the pop up it doesn't show up in the sidebar. Is it a keyboard trick? What am I missing?
Thanks for the help.