Haas OL1 M code issue...live spindle HELP

[Devet14]

I just joined this site since I see a lot of potential to hone in my skills. Apart from what I've learned in school and little bits at work I'm not to handy with machining other than the basics.

We have 2x OL-1 and we just purchased a third machine. I'm trying to machine one side of a glass part and rotate it 180 and machine a notch on the other side. Now I need to orient the spindle initially machine it and orient it 180 and machine the other side.

I know I can do this with M154/M155 c axis disengage and engage. The problem is my OL-1 does not recognize M14/M15 sprindle clamp and unclamp. It simply causes on alarm on that line.

Also I tried to play with M19/M20 orient spindle but the problem I'm having with that is after the spindle rotates it gives me an error regarding the G01/G05 interpolation g code.

Is there a parameter to unlock the M14/M15 spindle clamp. Any advice would help. Thanks in advance.