sample g code program for hitachit 48v fanuc 6mb

[beekeeper]

Does anyone have a small sample g code program for a hitach maccmatic 48v with a fanuc 6mb control. I am having trouble getting the machine to pick up the next tool offset I want to see how it is written and also a g54 placement any thing will help thanks

[CNCRim]

Post your program onl here... let's us take a look at your.

[sinha_nsit]

You also need to find out what compensation memory you have : A, B, or C?

[beekeeper]

Originally Posted by CNCRim Post your program onl here... let's us take a look at your.

i dont have a code with me but here is close to what I got starting out

o5555
N001 G20
N002 G80 G90 G80 G40 (SAFETY LINE)
N003 T1 M6
N004 S1000 MO3
N005 G00 G54 X.5 Y.5
N006 G43 H2 Z2.0 M08
N007 G01 Z-.5 F10.0
N008 G01 X10. Z.5 F10.0

[sinha_nsit]

What exactly is the problem?

[CNCRim]

I don't see anything, except suggest below.

Originally Posted by beekeeper o5555 N001 G20 N002 G80 G90 G80 G40 (SAFETY LINE) N003 T1 M6 <------------- tool one N004 S1000 MO3 N005 G00 G54 X.5 Y.5 N006 G43 H2 Z2.0 M08 <----- this where the tool offset pickup, normally I like T1 offset H1. N007 G01 Z-.5 F10.0 N008 G01 X10. Z.5 F10.0