| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| G-Code Programing Discuss G-code programing and problems here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#2
 
08-25-2010, 09:14 AM
| |||
| |||
| O0000(* 0_393-HEX-USING-0_500-END-MILL-OP1 *) (*****************************) N1 G54 G28 U0. G28 W0. (***TOOL-1-OFFSET-1***) (***FACE*1/2 FLAT ENDMILL***) G0 T0101 G18 G98 M35 G40 G80 G28 H0. G0 C0. Z.25 /M08 X1.443 G97 S2500 M33 G12.1 G1 X1.443 C0. F150. Z.1 Z-.5 F5. G41 X.893 C-.1106 G2 X.638 C-.3314 R.255 G1 X.255 C-.442 G2 X0. C-.4761 R.255 X-.255 C-.442 R.255 G1 X-.638 C-.3314 G2 X-.893 C-.1106 R.255 G1 C.1106 G2 X-.638 C.3314 R.255 G1 X-.255 C.442 G2 X0. C.4761 R.255 X.255 C.442 R.255 G1 X.638 C.3314 G2 X.893 C.1106 R.255 G1 C0. G40 X1.443 Z.25 F150. G13.1 G28 V0. G28 U0. G28 W0. G28 H0. M35 M01  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| live tooling on a lathe | kkronja | PTC Pro/Manufacture | 2 | 03-12-2010 12:13 AM |
| Recommend a lathe with live tooling for me? | SRT Mike | General Metal Working Machines | 0 | 02-28-2009 01:37 PM |
| Lathe with live tooling | baldysm | General CAM Discussion | 5 | 12-26-2007 10:28 PM |
| ANy one with a Puma 300M with live tooling? | M-man | Daewoo/Doosan | 8 | 06-27-2006 12:25 PM |
| Live tooling in Lathe package? | Linchpin | OneCNC | 3 | 04-19-2006 04:13 AM |
| | |
Linear Mode
