Fanuc Tool Life Management time units

[inflateable]

Hi All,

I'm struggling to get tool life management working properly on our Hardinge mill.

I can register all the tools ok, and get the tool life mangement working, but the tool life expires in about a minute, regardless of the number I select. I suspect I'm using milliseconds rather than minutes for the units of time, but what (if any) is the parameter to change it?

My tool life register program looks like this:
%
:8003(TOOL LIFE REGISTER PROGRAM)
G10L3
P1L1075(GROUP 1 TIME 1000 MINS)
T1H1D1(TOOL 1 L-OFFSET, DIA-OFFSET)
P2L1075(GROUP 2 TIME 1000 MINS)
T2H2D2(TOOL 2 L-OFFSET, DIA-OFFSET)
etc...

I'm clearly doing something stupid, but can anyone tell me what it is?

Thanks!

[norbert.barnard]

which fanuc control do you have ?

[inflateable]

it's Oi, but I've worked out the problem now. I was misinformed and that particular machine hasn't got the tool life option installed.

Which is why it wouldn't work...