Need Help! Mori seiki NV4000 DCG


Results 1 to 10 of 10

Thread: Mori seiki NV4000 DCG

  1. #1
    Registered
    Join Date
    Jun 2017
    Location
    United States
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Mori seiki NV4000 DCG

    PLEASE HELP. I have Mori Seiki NV4000 DCG with Fanuc 18i controls. It will not read the G1 line in the program. It does however read G0G90G59 X0Y0; Z.1M80; but stops at the G1 Z-.150 F10.; line.Any help you could give me will be very much appreciated.I even try G1 G98 Z-.150 F10.;

    Similar Threads:


  2. #2
    Member dcoupar's Avatar
    Join Date
    Mar 2003
    Location
    USA
    Posts
    2932
    Downloads
    0
    Uploads
    0

    Default Re: Mori seiki NV4000 DCG

    Some thoughts:

    Is the spindle running? I know on the Doosan machines I used to work with there was an M-code that allowed the machine to feed with the spindle not turning.

    Is there an alarm?

    Are you putting a decimal at the end of the F10.? If it's just F10 you could be feeding at 0.001 IPM.

    Maybe it's reading ahead and something in the folllowing blocks is causing it to stop.



  3. #3
    Registered
    Join Date
    Jun 2017
    Location
    United States
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Mori seiki NV4000 DCG

    Yes the spindle is running and i used conversational programming to write the program.I was programming i.d square



  4. #4
    Member
    Join Date
    Dec 2012
    Location
    The Netherlands
    Posts
    392
    Downloads
    0
    Uploads
    0

    Default Re: Mori seiki NV4000 DCG

    Hi,

    Line G0G90G59 X0Y0; Z.1M80, ..........M80........?
    Change M80 to M08 and I think it's solved.

    Regards,
    Heavy_Metal.



  5. #5
    Registered
    Join Date
    Jun 2017
    Location
    United States
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Mori seiki NV4000 DCG

    M80 turns the flood coolant on.M8 turns the spindle coolant on. I use M80 in all in all programs



  6. #6
    Member
    Join Date
    Feb 2006
    Location
    india
    Posts
    1792
    Downloads
    0
    Uploads
    0

    Default Re: Mori seiki NV4000 DCG

    Insert G98 in a previous line.
    Make sure to put a decimal in F value.
    Does G0 work?
    Axis lock?
    Feed override 0%?



  7. #7
    Member dcoupar's Avatar
    Join Date
    Mar 2003
    Location
    USA
    Posts
    2932
    Downloads
    0
    Uploads
    0

    Default Re: Mori seiki NV4000 DCG

    Quote Originally Posted by sinha_nsit View Post
    Insert G98 in a previous line.
    Make sure to put a decimal in F value.
    Does G0 work?
    Axis lock?
    Feed override 0%?
    I believe G98 is for specifying canned cycle return to initial Z on his mill... don't think that's his problem. Did you mean G94 (feed per minute)?



  8. #8
    Member
    Join Date
    Apr 2011
    Location
    USA
    Posts
    841
    Downloads
    0
    Uploads
    0

    Default Re: Mori seiki NV4000 DCG

    Press the SYSTEM function button then press the Diagnostic soft key. While in this state does any of the bits turn on?



  9. #9
    Member
    Join Date
    Feb 2006
    Location
    india
    Posts
    1792
    Downloads
    0
    Uploads
    0

    Default Re: Mori seiki NV4000 DCG

    Quote Originally Posted by dcoupar View Post
    I believe G98 is for specifying canned cycle return to initial Z on his mill... don't think that's his problem. Did you mean G94 (feed per minute)?
    My mistake.
    G94 for mill and G98 for lathe.
    This, however, may not be the issue.



  10. #10
    Registered
    Join Date
    Jun 2017
    Location
    United States
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Mori seiki NV4000 DCG

    It was a chip under pellet table. It will usually gives pellet seating alarm,but did not this time.Indexed pellet manually and cleaned the table post and under the tables.Now it runs fine.Thank you all for your time



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Mori seiki NV4000 DCG

Mori seiki NV4000 DCG