Originally Posted by
antoinedrouin
I tried the X0.00001 instead of X0 and it does work as in the tutorials I found. Thanks!
Now regarding the other problem, I noticed that when using G18 (XZ plane) and trying to make a circle using "G2 X0 Z0 K10", the software tells me that the Z axis is not in the right plane. If I omit the Z and put "G2 K10", it will work but only the X axis oscillates (as stated in the original post). Our setup also mentions a YY axis (for a total of 4) although there is no motion associated with it. I noticed that when I use "G18 G2 X0 YY0 K10", it works. It is as if the G18 plane was a X-YY plane. How could I change which axis is in which plane?