G50 Fanuc 6T Lathe - Tool Setting

[AZUNIGA]

We recently lost all the parameters on our Mori Seiki SL6. The guy who had all the back up programs quit the same week and he took everything with him without us knowing.
The problem is that I am only used to setting up using Geometry and this controls will not allow it. I have no experience with G50 programming. (using a reference position).
We use gang tooling (Turn and thread on a horseshoe holder. We turn on top and thread on the bottom. (8rd Threads on 2.375 - 4.500 API tubing)
Please help me understand how to set up my program and touch off the tools.

This will be my regular program:

O4500 (4.5 EUE Pin)
G00 T0201
G97 M03 S450
G0 X5.0
Z.1
G01 Z0.0 F0.020 M08
X2.933 F.015
Z-.125
G04 X.05
G0 Z.1 T0202
X4.1305
G01 Z0 X4.1305 F0.025
X4.6247 Z-.4280
X4.7788 Z-2.8943F0.030
X4.9346 Z-3.2068
G0 X5.100
G0 Z2.0

How can i translate this to a G50 program by using a reference geometry.
I do not want to index since am using the same tool with different offsets.
I still need to add the threading part which is based on a G92 code.
How can I set up each tool offset?
I need help desperately!!

Thank you!

Similar Threads:

• Need Help!- Tool Setting on a Tsugami Swiss lathe
• FANUC O-T Tool setting
• Newbie- FANUC tool frame, setting positions properly for an accurate tool center point
• Problem- Fanuc O-TT tool setting proceedure
• Question on setting up lathe tool offsets

[Heavy_Metal]

Hi,

Did you check your Private Messages ?

Regards,
Heavy_Metal.