And the last portion of the part
Loading program...
Error code 10009 on line 6:
The M-Code is not defined
Error code 10009 on line 8:
The M-Code is not defined
Error code 10009 on line 9:
The M-Code is not defined
Error code 10009 on line 11:
The M-Code is not defined
Error code 10027 on line 13:
Unable to parse the line
Error code 10009 on line 14:
The M-Code is not defined
Error code 1332 on line 31:
The vector to the center defines
an invalid arc. The arc cannot
be drawn from the beginning point
to the ending point with the
center as specified.
: (PGM, NAME="1001")
; T2 D=0.25 CR=0 - ZMIN=-0.265 - FLAT END MILL
: G90 G40 G94
G17
G70
M26
; 2D CONTOUR2
M9
M26
:T2 M6
M26
S10000 M3
H0
M9
G0 X-1.1162 Y0.3514
Z0.395
Z0.2
G1 Z0.0694 F4
Z-0.005
X-1.1159 Y0.3515 Z-0.0089
X-1.115 Y0.3516 Z-0.0127
X-1.1135 Y0.3518 Z-0.0163
X-1.1115 Y0.3521 Z-0.0197
X-1.109 Y0.3525 Z-0.0227
X-1.106 Y0.3529 Z-0.0252
X-1.1027 Y0.3534 Z-0.0273
X-1.0991 Y0.354 Z-0.0288
X-1.0954 Y0.3545 Z-0.0297
X-1.0915 Y0.3551 Z-0.03
X-1.0668 Y0.3588
G17 G3 X-1.0457 Y0.3872