Hi Forum,
Scenario: (Hobbyist)
Solidworks -> Camworks - Post processor -> G-code- Mach3 (Sherline 2010 mill)
Have an issue and really not sure how to approach the problem and thus remedy - so in simple terms stuck.
I have attached a few files:
- G-code in question
- Error codes from Mach 3 on loading
- Post processor 4SCW
anyone who can give me some guide / help would be gleefully and gracefully estatic.
Similar Threads:
- Need help with g code for fire control pocket on AR15 lower reciver, have G code.
- Program to Convert Mill g code To Laser g code - CMTL
- mach3 crashing with run of code/drilling holes through table with other code
- Newbie- corel.hpgl > sheetcam.tap > pronterface.g-code > slic3r.g.code> ramps 1.4 > H-BOT
- Newbie- Takeout Unused G Code commands in Mastercams Generated G Code
Hi
the is output from CamWorks for SolidWorks - no changes- theoretically with an operational post processor there should be no errors
first, there are lines that actually have 2 lines together. Like this line
N6 G40 G90N11 (16MM 60 DEG CARB CENTERDRILL)
Should be
N6 G40 G90
N11 (16MM 60 DEG CAR CENTERDRILL)
The second thing is that you have drilling cycles that you don't cancel before changing tools
ok I have progressed- crash course in to G-code
modified line break from post processor for G80 - alas no errors.