If you have macros you can use this. You can adjust the pullout and return to be feed or rapid as needed.
#103=1.0 (FINAL DEPTH OF DRILL)
N12(5/64" DRILL)
#101=.02 (1st peck amt.)
#102=.04 (each peck amt.)
S800M13 (rpm + coolant on)
S1500
T1212
G1X.8Z-.02F.03
X0
(PECKING CYCLE)
WHILE[#101LT#103]DO1
G1Z#101F.0008 (drill)
G1Z-.02F.03 (pullout of part)
G4X.5 (let cool)
G1Z[#101-.01]F.03 (return into part .01 away)
#101=#101+#102
END1
G1Z-.02F.03
G4X1.0
X1.4
T0
S1000
G4X.5
S500
G4X.5
M0