Fagor Radius Problem

[KeithH]

I am using an 8055 controller on a 3 axis mill and am having trouble undershooting or overshooting inside and outside radius cuts. It works fine with a feed rate @ 50 or below but anything over this and it cuts too much material or not enough material. Any suggestions?

Similar Threads:

• fagor programming problem
• Fagor 8025GP Problem
• problem with cnc fagor 8025
• Fagor 8040 Dxf Problem
• FAGOR Controller Tool Radius Problem

[uav]

Show example of the program.

[ajl6549]

Some controlers erroniosly cut radii at high feed rates try using cutter comp. to dial it in.

[KeithH]

G1 Z0
G3 X-6.071 Y3.573 R.014
X-6.057 Y3.5736 R.014
X-6.071 Y3.5876 R.014
X-6.085 Y3.5736 R.014
G0 Z.5