Been trying to read some threads and comment in a couple but it seems that you have the show newest posts first button selected. It's really confusing the hell out of me as every other forum I go on is the other way round. Any way of changing it as I can't see an option anywhere?
![]()
This forum has over 130,000 members and this is the first time I have seen this type of complaint; don't you think you should conform to the way it exists rather than have everyone else change.
An open mind is a virtue...so long as all the common sense has not leaked out.
strange thing is, I see it the 'right' way and always have done...oldest post first, which is the default setting (incidentally Monza, that is the default for mycncuk which I know you visit too) so I can only assume that somehow your settings got changed... corrupt cookie or database entry
If you're in Europe why not come and visit the UK CNC Community at http://www.mycncuk.com
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)