LinkBack URL
About LinkBacks
Been happening to me for about two weeks now, maybe more??
| | |
Only on this Forum, every time I post the screen blanks and bottom status bar shows 'Stopped'
To see the post I have to go back one page and hit the refresh and its there!!
Anyone else get this also?
Al.
CNC, Mechatronics Integration and Custom Machine Design (Skype Avail).
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Been happening to me for about two weeks now, maybe more??
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I havn't had any problems for a while (IE8).
What browser are you running (Firefox)?
.
Free DXF Files - myDXF.blogspot.com
Firefox 3
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Same here FF3
Al.
CNC, Mechatronics Integration and Custom Machine Design (Skype Avail).
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
I'm running version 2.0.0.8 and don't have the problem for what that's worth.
IE, no problem here.
Dear Al,
IE8 seems to work here. It does all sorts of ghastly stuff in other applications though. Really awful...
Best wishes,
Martin
Just had to test to see.
FireFox 3.0.8
No problem. (If there is I will edit post)
Greg, It only does it to me maybe once every day or two. It's not every post.
Edit: It did it on this post
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
OK I have never seen that.
I would try deleting the CNCzone cookies.
Greg
It did the same thing maybe two years ago for a while. I think it's the site software.
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Posting Permissions
| | |
