Results 1 to 6 of 6

Thread: Resequence thread from oldest to newest post?

  1. #1
    Registered
    Join Date
    Sep 2008
    Location
    USA
    Posts
    2
    Downloads
    0
    Uploads
    0

    Resequence thread from oldest to newest post?

    Most of the forums I subscribe to have the initial post on page 1 item 1. I find it confusing when reading a lengthy thread and noting I was on page, oh lets say 10, and come back in a couple of days and my page 10 is all differenct because the newer posts are added to the front end. Have I missed something here or is there an option that will show a thread from oldest to newest, rather than from newest to oldest? Reading backwards sucks.


  2. #2
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Twp, MI....USA
    Posts
    22,289
    Downloads
    0
    Uploads
    0
    UserCP > Edit Options (Under "settings and options" on the left)>Thread display options
    Gerry

    Mach3 2010 Screenset
    http://home.comcast.net/~cncwoodworker/2010.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  3. #3
    Registered
    Join Date
    Sep 2008
    Location
    USA
    Posts
    2
    Downloads
    0
    Uploads
    0
    That's what I've been looking for! Thanks very much.


  4. #4
    Registered
    Join Date
    Jan 2009
    Location
    USA
    Posts
    25
    Downloads
    0
    Uploads
    0
    I don't see a ""settings and options" on the left" but I do see a "display modes"

    I've tried all three options, but still find it frustrating. Often I seem to find myself on a page showing only the last post, with no link to the previous page. It may just be me, but this seems different from other forums.

    There doesn't seem to be an option for "basic". Where it displays the posts from the first to the last, and there's always a link to go to the previous or next page.

    Like I said, it might be just me, but I find the format frustrating at times.


  • #5
    Registered
    Join Date
    Jan 2009
    Location
    USA
    Posts
    25
    Downloads
    0
    Uploads
    0
    ok. Never mind. I may have it now


  • #6
    Registered
    Join Date
    Nov 2010
    Location
    US
    Posts
    1
    Downloads
    0
    Uploads
    0
    tryin to post a thread and im a newbie


  • Similar Threads

    1. Viewing posts - oldest first
      By BillTodd in forum CNCzone Club House
      Replies: 3
      Last Post: 08-08-2008, 09:45 AM
    2. I've tried 3 times now to post a thread-
      By CNCadmin in forum CNCzone.com FAQ
      Replies: 0
      Last Post: 02-16-2007, 01:10 PM
    3. V22 Post Demos Thread
      By tobyaxis in forum BobCad-Cam
      Replies: 17
      Last Post: 09-13-2006, 11:59 PM
    4. Oldest lathe you'd buy?
      By SagaciousKJB in forum General Metal Working Machines
      Replies: 4
      Last Post: 02-24-2006, 05:18 PM

    Posting Permissions


     


    About CNCzone.com

      We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

    Follow us on

    Facebook Dribbble RSS Feed


    Search Engine Friendly URLs by vBSEO ©2011, Crawlability, Inc.