LinkBack URL
About LinkBacks
Anywhere u like?
| | |
Dear all,
I'm new here - I just want to know what is the best place for my question.
We have some problems with a Electrical Discharge Machine (ELOX heritage 12, with FANUC 11 M).
Many thanks in advance
Anywhere u like?
Look at the Forum Home page and go through the different categories to find one that most closely relates to your questions. There is a forum specifically for EDM's, Plasma and Waterjet Machines in the Metalworking Machines catagorie, or maybe in Metalworking under Moldmaking or Diemaking and Die Cutting. Dont worry too much about it, the moderators will move it if it is completely out of place and let you know where they put it.
Halfnutz
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
does anyone know which one is made a little more accurate than the rest i know they are all made in china [probably in the same factory] any information would be appreciated toni afpuli2002@yahoo.com thank you
EDM is usually posted hereOriginally Posted by cahipun
http://www.cnczone.com/forums/general_waterjet/
Al.
CNC, Mechatronics Integration and Custom Machine Design (Skype Avail).
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Posting Permissions
| | |
