| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| FlashCut CNC Discuss FlashCut CNC software here! |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
04-04-2007, 12:33 AM
| |||
| |||
I have used flashcut on a mill conversion and it worked well and i had no problem setting up the drives. I have moved up to a Tormach mill, and now am CNC ing my lathe with the flashcut system. I have a 5 turn/ inch ballscrew, with half stepping / 400 step/rev stepper and direct drive, yet for some reason i am getting 3.6667 thou for each thou commanded and this is consistent. Any thoughts where i am going wrong? Wayne    |
|
#2
04-05-2007, 12:51 PM
| |||
| |||
| Hi Wayne... Is there any gearing going on? Remember to put that in with the other config settings such as screw pitch and motor info. Are all screws 5 turns per inch? Feel free to call us 847-940-9305 and have your setup file at hand so that we can help you out. Regards Mike Mccall Flashcut CNC |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| How do you like FlashCut? | CNCadmin | FlashCut CNC | 31 | 06-28-2011 11:33 PM |
| Should I get Flashcut? | DonFrambach | FlashCut CNC | 14 | 03-30-2010 08:34 AM |
| Using BobCAD with Flashcut | ecope | FlashCut CNC | 4 | 05-13-2009 12:59 PM |
| Flashcut? | A&P Mech | General Metal Working Machines | 1 | 05-23-2006 05:38 AM |
| Flashcut users | CNCadmin | FlashCut CNC | 1 | 11-11-2003 07:22 PM |
| | |
Linear Mode
