Rutex 510A

[ty1295]

Anybody used this yet?

Looks to be an all in one driver for both axis and torch height controller.

Any comments, good bad?

Any other solutions that have worked for people when building and using a plasma cutter?

[danymetal]

bonjour avez vous des info sur les carte rutex r510a

[Aksess]

I have this contorling board but have never tryed it yet. Yes it has auto torch height control and also will control your plasma after it is wired into the torch. Turning it on and off. and sencing arc voltage well worth the money and the p cut software comes with it.

[Inventthis]

I just designed and built my CNC plasma table with the R510B. Table is working but I have some concerns with the driving software (I am using a demo of Steelcut- the guys who developed it are out of business). So far, the table is not able to draw perfect circles. I have attached a pen to the z axis to check the table accuracy. Rutex offer Pcut, which is Dos based and not user friendly. Will post pictures soon.

[danymetal]

bonjour si vous avez des infos j'ai moi meme une carte r510b
je nai pas fai d'essais .pouvez vous me dire si PCUT fonctionne bien .je crois quil y a une vertion PCUT PRO SI VOUS AVEZ DES INFO SUR LE PRODUIS

[mlaws1172]

I have also used the 510b and the hardware is good but the software (pcut)
needs help and is limited to 1000 blocks. They are coming out with new software that is for ( steelcut?) windows but I do not know when.When they get the software as good as the hardware I think it will be a good controller.

Have fun building
Mike Laws

[Inventthis]

Originally Posted by danymetal bonjour si vous avez des infos j'ai moi meme une carte r510b je nai pas fai d'essais .pouvez vous me dire si PCUT fonctionne bien .je crois quil y a une vertion PCUT PRO SI VOUS AVEZ DES INFO SUR LE PRODUIS

J'utilise steelcut pour tester ma table. La carte R510B est un bon produit mais il faut un meilleur software qui marche sur windows. La carte est facile a connecter et je pourrai t'envoyer mon diagramme de connection.

Here are some pics of my cnc table using Rutex R510B. For now I have some trouble with tuning the motors. I am not able to draw circles with my setting (see picture). I will need more help if I cannot set it up correctly.

[danymetal]

bonjour belle machine sa fais plaisir a voir . la table que lon voi sur les photo fonctinne t'elle avec la r510b ? Moi j'en suis au essais moteur j'utilise des reliance electric electro-craf .si vous avez des photo r510a + moteur que vous utiliser

[danymetal]

j' ai fais des essais avec d'autre moteur mai quand je metais sous tention la r510b les moteurs commencer a tourner san lancer le programe si vous avez des info sur moteur et encodeur que vous utiliser

[Inventthis]

I use poly scientific motor C23 series (www.polysci.com )for all axes and 250CPR US digital encoder.