| | |
Milling Hexagon Using Rotary Hi To Everyone
I Am 3 Months Into Fc I Need Some Help
I Am Trying To Mill A Hexagon On A Daewoo Puma 230msb Using Fc Version 13.1.0.52
I Have Set A 10mm Dia Carbide
When I Output the Program the tool is in fresh it appears in the program as if g41 is not being used but it outputs withg41 in program.
Cheers
Last edited by ASHY; 01-04-2007 at 11:01 AM.
Posting Permissions
| | |
LinkBack URL
About LinkBacks
