| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| FeatureCAM CAD/CAM Discuss FeatureCAM CAD/CAM software here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
09-10-2006, 04:59 AM
| |||
| |||
I use featurecam from 3 years.....in the win xp task menager the cpu % used from featurecam don't go up 50% in all the work i made.... when i'm doing a 3d parts the program is slow.... Any answer??? Sorry for my english    |
|
#2
10-12-2006, 06:58 PM
| |||
| |||
| I think you will find that is more a function of your graphics card than CPU. Tom's Hardware just did a comparison and you can get a powerful 3D card for $100 now. http://www.tomshardware.com/2006/09/...for_the_money/ |
|
#3
10-12-2006, 10:15 PM
| ||||
| ||||
| If you have a dual core processor, you usually will never see more than 50% use in task manager. If the display is slow, than I'd also say video card. If toolpath generation is slow, then it's either RAM or processor.
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
