I have found a better tutorial that walked through the steps, but it seems to be slow and cumbersome. As I search around it seems like there is a plug in type of program like "power- mill 3d" for feature cam. I am use to drawing in sloidworks . I would think the machine designs and more complex clamping solids would be created in a different platform then the basic feature cam program because of the difficult process of using the wiz to create extrudes. My main goal behind this is to add in accurate drawings of all the components I have from machine to clamps so as I create tool pats I can avoid collisions and be able to identify any problems. Thanks again for any advice.