Number of passes on a lathe


Results 1 to 2 of 2

Thread: Number of passes on a lathe

  1. #1
    Registered
    Join Date
    Dec 2016
    Location
    United States
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Number of passes on a lathe

    I'm turning down a steel part and I'm trying to get Feature to write in lighter passes, it's cutting too heavy for the tool to handle. Is there a way to do this? I only use this software a few a year so there's always some new option I'm always trying to figure out.

    Similar Threads:


  2. #2
    Member sabregr's Avatar
    Join Date
    Dec 2013
    Location
    Neapoli
    Posts
    11
    Downloads
    6
    Uploads
    0

    Default Re: Number of passes on a lathe

    Go to the properties of the feature. Click on Rough Operation. There is a tab called Turning. Change Depth of Cut to your needs.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Number of passes on a lathe

Number of passes on a lathe