Need Help! General Fanuc Post


Results 1 to 2 of 2

Thread: General Fanuc Post

  1. #1
    Registered
    Join Date
    Jan 2017
    Location
    United States
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default General Fanuc Post

    Hi all! I have featurecam 2017 and I am looking for a post processor. The machines I work on DO NOT have Y axis. I do have a post that is for Y axis. If someone can share a post with me that supports X,Z,C axises that would be great. Otherwise if someone can tell me how to modify my Y axis post to become an only C axis post that would be great too!! Thanks in advance!

    Similar Threads:


  2. #2
    Registered
    Join Date
    Apr 2016
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: General Fanuc Post

    Is this for Turn/Mill? If so PM me I can help you.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

General Fanuc Post

General Fanuc Post