Arc problem in featureCAM turn


Results 1 to 2 of 2

Thread: Arc problem in featureCAM turn

  1. #1
    Registered ptronix75's Avatar
    Join Date
    May 2015
    Location
    Egypt
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default Arc problem in featureCAM turn

    Hello every one
    I'm using FeatureCAM and Mach3, almost every thing is OK, except creating and arc or curve, it works great in the simulation, but in Mach3 I see the roughing pass is OK, but in finish pass I get one of 2 cases:
    1- the arc become a straight line in finish pass.
    2- the arc become circles.
    Here I attache screen shot of the case, and Mach3 settings, also I attached the GCode, is it Mach problem or the post

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Arc problem in featureCAM turn-diagram-png   Arc problem in featureCAM turn-acc-knob-png   Arc problem in featureCAM turn-acc-knob-arc-png   Arc problem in featureCAM turn-op-png  

    Arc problem in featureCAM turn-gc-png   Arc problem in featureCAM turn-conf-png  
    Attached Files Attached Files


  2. #2
    Registered
    Join Date
    Apr 2017
    Location
    Germany
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Arc problem in featureCAM turn

    Hi, try this

    Arc problem in featureCAM turn-arc-jpg

    Quote Originally Posted by ptronix75 View Post
    Hello every one
    I'm using FeatureCAM and Mach3, almost every thing is OK, except creating and arc or curve, it works great in the simulation, but in Mach3 I see the roughing pass is OK, but in finish pass I get one of 2 cases:
    1- the arc become a straight line in finish pass.
    2- the arc become circles.
    Here I attache screen shot of the case, and Mach3 settings, also I attached the GCode, is it Mach problem or the post




Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Arc problem in featureCAM turn

Arc problem in featureCAM turn