Need Help! Post for Haas ST30Y needed


Results 1 to 3 of 3

Thread: Post for Haas ST30Y needed

  1. #1
    Registered
    Join Date
    Mar 2012
    Location
    sweden
    Posts
    16
    Downloads
    0
    Uploads
    0

    Wink Post for Haas ST30Y needed

    Hello looking for a postprocessor to Haas ST30 Y to Featurecam.
    With live tools and Y axis and programmable tailstock.
    Would be very grateful if someone wanted to share.
    So I will not have to write a new or rewrite an old postprocessor.
    Sincerely Toby

    Similar Threads:


  2. #2
    Registered xino's Avatar
    Join Date
    Nov 2015
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Post for Haas ST30Y needed

    an identical request for me, thanks



  3. #3
    Registered
    Join Date
    Aug 2017
    Location
    United States
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: Post for Haas ST30Y needed

    ever have any luck locating a post? we have a st-20y that we need a post for. would be greatly appreciated....



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Post for Haas ST30Y needed

Post for Haas ST30Y needed