| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| FAQ of CNC Machine building Post CNC Router machine FAQ's and answers here! (Note all posts are moderated and once approved will be posted.) |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
04-14-2009, 08:42 PM
| |||
| |||
Nevermind I found the info I was looking for. Delete this topic, I posted in the wrong section anyway. Last edited by LogansMind; 04-15-2009 at 11:47 PM.    |
|
#3
04-15-2009, 07:05 PM
| |||
| |||
| I was able to find it on the web: http://www.jameco.com/webapp/wcs/sto...gDrillDownView - " MOTOR, STEPPER, 9.6VDC/.48A, 1000 GM-CM" |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| make a brushless servo use pic or avr for cnc controller,let's go! | xosliu | CNCzone Club House | 3 | 09-20-2010 10:08 AM |
| Can i make my own Larger DC Servo Motors? | higgrobot | Servo Motors and Drives | 27 | 04-04-2010 07:04 PM |
| Should my motors make noise? | thegimpster | DIY-CNC Router Table Machines | 2 | 06-04-2008 01:21 PM |
| Motors make sound but no movement | WarrenW | Mach Software (ArtSoft software) | 18 | 12-20-2005 11:05 PM |
| Can I use this motion controller to make cnc router? | Clasic31 | General Electronics Discussion | 7 | 12-11-2003 10:17 AM |
| | |
Make Controller and Motors 
Linear Mode
