I got the mechanics of my machine built and working fine. I'm just stuck trying to find a good driver. The EZ Driver from hobbycnc looked good but shipping to the UK pushed it over budget.
I need 3 Axis, 1.3A per phase
The machine has only cost me £130 so far so I really can't justify more than £40-£50 for this.
Does anyone know of a similar driver / kit / set of plans I can get to the UK?
Otherwise I'm going to have to design and build my own and that's going to be a real pain.
(also I'm planning to set this up with EMC2 so known compatibility would be great)