Need Help!- Change in Fanuc Oi MC & Oi MD Controller

[msantaji1]

In Oi MC G68 is valid code But in Oi MD It is invalid, What is reason?

[dcoupar]

G68 is an option. It is probably not turned on in the M-D

[msantaji1]

what is procedure to turn on G68 in Oi MD?

[arvindpatel]

To turn on the G68 in Oi MD you need to set parameter bit of 9900 series option parameters..You will get this option from fanuc.
Regards
ARVIND

[ranjankrana]

Originally Posted by msantaji1 In Oi MC G68 is valid code But in Oi MD It is invalid, What is reason?

Coordinate system rotation is a standard feature in FS0iMD. Please look into the manual no. B-64304EN-2, page 224, chapter 6.10 for the details.

[fanuc-support.c]

Like on the 0i-C, on the 0i-D there aren't 9900+ options like on other control models. There between 8130 and 8137, and you can simply turn them on, normal parameters.

As this is standard you can't turn it on or off, its just there, ranjankrana is correct, its in the manual where he said.

[rapo]

help! i need to learn simple pocket macro programing on fanuc oi md vertical mill controller.