Need Help!- Hitachi Seiki TF20

[rai]

I have a Hitachi Seiki Type - TF20 turning center equipped with Fanuc 21T with Fanuc powermate E (A06B-0168-B012) for servo turret. Presently I am getting 1033 turret drive alarm. But I could not get alarm discription on screen & powermate -E drive. Powermate-E drive having 8 LED indicators and following indicators are in on condition:
SI = ON (RED), SO = ON (Green), EN = ON (Green)
As I donot have powermate -E manuals, I do not know, How do i overcome this problem?
Kindly somebody help me to solve this problem.

[rai]

Please sombody help me out from this problem.

Originally Posted by rai I have a Hitachi Seiki Type - TF20 turning center equipped with Fanuc 21T with Fanuc powermate E (A06B-0168-B012) for servo turret. Presently I am getting 1033 turret drive alarm. But I could not get alarm discription on screen & powermate -E drive. Powermate-E drive having 8 LED indicators and following indicators are in on condition: SI = ON (RED), SO = ON (Green), EN = ON (Green) As I donot have powermate -E manuals, I do not know, How do i overcome this problem? Kindly somebody help me to solve this problem.

[ranjankrana]

Use DPL/MDI unit to check the Alarm on Powermate E, Sometimes for absolute battery alarm occurs. You can find two batteries on top front portion of Powermate E, one battery is for system and another is for Absolute ulse coder. after changing the battery you need to set the turret home position, in that case also you require DPL/MDI unit.

[rai]

Originally Posted by ranjankrana Use DPL/MDI unit to check the Alarm on Powermate E, Sometimes for absolute battery alarm occurs. You can find two batteries on top front portion of Powermate E, one battery is for system and another is for Absolute ulse coder. after changing the battery you need to set the turret home position, in that case also you require DPL/MDI unit.

thank you very much for your reply. But I donot have DPL/MDI unit to check the alarm on Powermate E. from where I can get DPL/MDI unit? could you also send me the manuals for Powermate E? as I am not familier with powermate E.
My mail id as follows:
bewide_22@yahoo.co.in

[gabo]

i have a GE fanuc powermate a02b-0166-b531 , with an alarm that i can not read , i have recommended to buy a dpl / mdi GE fanuc a02b-0118-c013 , but i do not know if it will work with the model of powermate that i have . could , anyone know if i can use this type of dpl / mdi ,with that powermate .? thanks.

[axis india]

Originally Posted by ranjankrana Use DPL/MDI unit to check the Alarm on Power mate E, Sometimes for absolute battery alarm occurs. You can find two batteries on top front portion of Powermate E, one battery is for system and another is for Absolute ulse coder. after changing the battery you need to set the turret home position, in that case also you require DPL/MDI unit.

hi ranjankrana

i m having 2 nos used techno wasino sl-10 cnc lathe with 4axis twin turret.
i m having problem with Power mate e red led is glowing i m having dpl mdi unit but i dont know how to use it can u please help me

[naeemmughal]

Originally Posted by rai View Post

I have a Hitachi Seiki Type - TF20 turning center equipped with Fanuc 21T with Fanuc ser.no# m-95454-232 electrical digram no# 1531-2101 powermate E (A06B-0168-B012) for servo turret. Presently I am getting 1033 turret drive alarm. But I could not get alarm discription on screen & powermate -E drive. Powermate-E drive having 8 LED indicators and following indicators are in on condition:
SI = ON (RED),
EN = ON (Green)
As I donot have powermate -E manuals, I do not know, How do i overcome this problem?
Kindly somebody help me to solve this problem.
send me mail on
mughalgee21@hotmail.com

[rai]

I have a copy of procedure to get rid of this alarm, I will let you know in couple of days.

Originally Posted by naeemmughal Originally Posted by rai View Post I have a Hitachi Seiki Type - TF20 turning center equipped with Fanuc 21T with Fanuc ser.no# m-95454-232 electrical digram no# 1531-2101 powermate E (A06B-0168-B012) for servo turret. Presently I am getting 1033 turret drive alarm. But I could not get alarm discription on screen & powermate -E drive. Powermate-E drive having 8 LED indicators and following indicators are in on condition: SI = ON (RED), EN = ON (Green) As I donot have powermate -E manuals, I do not know, How do i overcome this problem? Kindly somebody help me to solve this problem. send me mail on mughalgee21@hotmail.com

[dantkaledd]

It needs DPL/MDI board to check alarm and diagnose.

contact me.

dantkaledd@rediffmail.com

[mnucad]

We have a HITACHI SEIKI TF-20 with FANUC 21T control S/N:TF15741 and we have a problem to use this Lathe.

Our technician says S RAM BackUP must be 5 files and we have only four: 21nc, 21off, 21pmc, 21pro.
He says the LADDER BACKUP FILE IS MISSING. Anybody can help us?

we will appreciate a lot. if you need any of these four files, just ask to George jorge@mfgoregon.com

[mnucad]

We are stock for three months with this cnc turning center and we belive technicians are guessing the solution, we think they do not know much about this equipment.
Can any body help to check this problem and quote a solution? We can not wait other three months with this lathe off.
I do not know if is permited to post a problem related pictures link in this post but I will try it anyway seikitf20
Hopping anyone can help us to resolve the problem asap.
Thanks for reading this post.

[greenery_fr]

I have power mate E manual in pdf. If anybody need it give me your email