Need Help!- ALARM 9034 in Fanuc oi mate-TB turning center

[shavad_ind]

In my turning center with Fanuc oi mate-TB, alarm "9034 - SPN 1 Parameter setting error" is displaying.... please anyone can help me to fix this problem...
thanks...

[stevo1]

I looked through the manuals and I did not see anything in reference to this alarm. What kind of alarm is it??? PS, OT, SV etc.

What are you doing when this alarm appears?

Stevo

[f-bu]

Usually I see 9034 spindle alarm when start entering parameters in new machine, and automatic parameter setting does not work for particular drive/motor combination.
Are you sure no one played with machine parameters? Start checking all parameters from 4000.
Check if PRM 4019.7 = 1 - if so, that is - parameters for motor model are reset, but the new combination can not be set automatically. Get the backup of your parameters and B-65280 spindle parameter manual and start playing.

If you are lucky with the soft version, diagnostic 720 will tell you the wrong parameter, but this like a lottery... usually it is 0 or does not exist.
Check also PRM 4133 for motor model code - if it is 300 or 400, all the parameters for the spindle should be entered manually.

[MysticMonkey]

Post the model or partcode of your Fanuc spindle motor

I'm sure some one here has a copy of the standard parameters for that motor for you to cross reference

Or upload a backup of your machine

[shavad_ind]

Fanuc spindle motor
Model : β C/6000i
Type : A06B-1445-B200

thank all for your replies...

[f-bu]

beta iI 6/6000 is sensor-less type, it should be not A06B-1445-B200, but A06B-1445-B206 or B207
A06B-1445-B200 is beta iI 6/10000
Look for any backup parameters.... or call Fanuc