Need Help

[Siddique]

Hello!

I have a CNC lathe with Fanuc 21iTB controller.
The machine has UNIMAG bar feeder electrical interface.
Subsequently I bought "Servo 80" short bar feeder.

I have problem to activate bar feeder ioption in the controller (i.e. setting of D-parameters). How to access D-paraters and what to change there for Fanuc 20 i TB.

Looking forward for help.

[MysticMonkey]

These would be related to the MTB part of the machine

Please post the make and model of your CNC

also a picture of the interface and a copy of your ladder would be helpful

[Siddique]

Machine make is Spinner, Turkey (Spinner is a German brand)
Model is : TC-65-MC

For picture of the interface, i have to check the electrical panel.

[MysticMonkey]

I would suggest you contact the manufacturer directly

cnc-hotline@spinner.eu.com

Give them your
CNC model and serial number
perhaps they will help

[machill]

your machine has the barfeed interface standard.
if you contact Spinner direct they can direct you with a simple process of turning on the parameter.