FANUC P25 Base 2 Board for Series 15

[gbowne1]

I've got a Base 2 Board in the 15 control I have. It also says P25 on it on the silver/gray sticker on the edge.

It's a A16B-2200-0020/06C

has the blue honda edge connectors for "CNA" and "CNB". What connectors are these?

There are three (3) ea. blocks of 4 LED's on the front edge of the card. Two of them have 4 Green LED's and one has 4 Red ones, near the big Motorola 68020 chip.

I've been wondering what the base 2 board is and does. Is it an AXIS cpu with 1mb RAM?

There are places for 3 grounds (GND1, GND2 & GND3) and +5v.

Also has a 24MHZ crystal @ the location 4E (or E4) on the board.

Greg Bowne

[memoryman]

I can explain that but is better done over the phone.
Call me at work 289 389 6117 EDT during office hours.
We also have that board and other Fanuc parts in stock.
Bill

[gbowne1]

Ok Bill. Will give you a call. Look for call from the 206 area code. PM sent.

Greg

[gbowne1]

Bill, to clarify more our conversation of today here are the parts I have..

I have 15M CRT/MDI P/N A02B-0094-C041. This is the one with a vertical keyboard. Made in 1991.

I will gather a list of the 15M boards I already have.. including the P25 Base 2 board. Thanks for the information on the manuals.

Sorry about the confusion it was a busy day at the shop.

Will keep in touch with you

Greg