fANUC 6T "HITACHI SEIKI"

[yumuri]

FANUC SYSTEM 6T.
I have doubts on the COMMUNICATIONS of Mastercam (Pc) to the machine, ...How to know the :
1.FORMAT (THE OPCIONS ARE : ASCI,EIA,BIN)
2.PARITY (THE OPCIONS are: Odd,Even,None)
3.Data Bits(The opcions are:6,7,8)
4.Handshaking(None,sofware,Hardware)
Thanks !!!

[JohnA]

FANUC SYSTEM 6T.
I have doubts on the COMMUNICATIONS of Mastercam (Pc) to the machine, ...How to know the :
1.FORMAT (THE OPCIONS ARE : ASCI,EIA,BIN)
2.PARITY (THE OPCIONS are: Odd,Even,None)
3.Data Bits(The opcions are:6,7,8)
4.Handshaking(None,sofware,Hardware)
Thanks !!!

1. ASCII
2. Even
3. 7
4. Software if your cable has only 3 wires connected
Hardware if it has 5.